Dyras ESI-3000LC Bedienungsanleitung PDF herunterladen (Seite 3)

ESI-3000LC

4 5

Instruction manual for dyras ESI-3000LC steam iron with LCD display

NOTES

Please read the instruction manual thoroughly before using your new appliance. It is important to keep these

instructions as a useful reminder that’ll help you enjoy the many features available. The manufacturer is not

responsible if the appliance becomes damaged or defective as a result of the user not following the information

included in the instruction manual. If the appliance becomes faulty during regular use, it should only be repaired

by an authorised service engineer.

IMPORTANT SAFETY INFORMATION

The following safety instructions must be followed when using the appliance. Please read this section

very carefully!

Of course, it’s not possible for us to anticipate or provide safety rules for every specic situation, so we ask you to

apply commonsense precautions when using the appliance in a situation that isn’t described below.

• This appliance has been designed for household use only, no other (heavy duty) uses are permitted.

• Never use the appliance outdoors.

• The iron must only be stood on a heat-resistant surface (e.g. the rest plate of an ironing board) when it is

being used. Keep inammable material away from any of the hot parts.

• This device is not supposed to be used by physically or mentally handicapped people, or persons without

experience or knowledge (including children, as well), unless such a person supervises or guides their use of

the device, who is at the same time responsible for their safety. As for children, supervision is recommended

to make sure that they do not play with the device.

• You must not use any additional parts that are not ored or recommended by the manufacturer. Using them

may cause an accident or other problems with the appliance.

• Don’t put the appliance near hot objects (e.g. oven, hob, heating appliance etc.) or on any hot surface.

Don’t place the appliance anywhere it could slide down, fall or be knocked o accidentally.

• Don’t use the appliance in the presence of explosive or inammable gases, vapours or liquids.

• Please avoid using the appliance in any place where it would be subjected to high temperatures, low

temperatures, physical shocks or vibration. The appliance is designed to be operated and stored in a situation

where temperatures are between +5° and +40° Celsius. Do not use the appliance in a wet or humid

environment.

Dear Customer,

All electrical and mechanical equipment needs to be cared for appropriately. It’s important to note

that using or storing the appliance in certain conditions may adversely aect its lifespan and func-

tionality. Always protect the appliance from the conditions listed below.

Using or storing the appliance in a wet, humid or damp environment can cause:

– deterioration and premature aging of the cover and electric insulation of the appliance,

– premature wearing and aging of the plastic and rubber components,

– rust and corrosion aecting electrical components and metal parts.

Using the appliance in a dusty environment or in the kitchen (where the air may be contaminated

with vapours from cooking oil or grease) can cause:

– greasy dust coatings on the mechanical and electrical elements and the casing of the

appliance, which could result in electrical contact failure or even complete breakdown, and

could also damage the plastic and rubber elements.

– dirt on the soleplate, which will burn onto the soleplate and the fabric being ironed,

– unpleasant odours developing during use.

The eects of direct sunlight on the appliance can include:

– accelerated deterioration of the appliance casing and its plastic and rubber components,

damage to strength and other structural features. The appliance’s surface may become porous

and fragile, which may result in a safety risk.

Storing the appliance in cold or frosty environment may cause:

– damage to the plastic and rubber components; if they become fragile, this may result in a

safety risk.

– oxidation resulting from condensation, and corrosion of the metal components.

Direct and indirect heat (e.g. being too close to an oven or a heating appliance) can cause:

– damage, deformation, softening or melting of plastic or rubber parts and casing elements, or

deterioration of electrical insulation.

Continuous heavy use can cause:

– premature wear to the body of the iron,

– corrosion and scale that blocks the steam nozzles, particularly in a ‘hard water’ area,

– the spray and steam buttons to fail or become worn,

– electrical components to wear out or overheat,

– deterioration due to the eects of frequent heating.

Following the operating instructions and avoiding any of the conditions listed above will help you

increase the lifespan of the appliance. The manufacturer is not responsible if the appliance is stored

inappropriately or contrary to these instructions. You are recommended to have the appliance

1 2 3 4 5 6 7 8 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Dyras ESI-3000LC Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern